Bright+ Tone Up Sunscreen 50g: NABL Lab Test Report
NABL lab test report for Bright+ Tone Up Sunscreen 50g: heavy metals not detected, pathogens absent and pH 7.36. Batch AS5B002.
Safety Summary: Bright+ Tone Up Sunscreen 50g
Is Bright+ Tone Up Sunscreen 50g safe? Yes. It was independently tested at Sigma Test & Research Centre. The tested sample, from batch AS5B002, was analysed against the limits in the referenced standards.
Free from lead, cadmium, arsenic, mercury and antimony. The report found no detectable lead, cadmium, arsenic, mercury or antimony - each was below the laboratory's detection limit of 0.25 mg/kg.
Free from harmful bacteria and fungi. Four organisms were tested: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. All were reported Absent. Total microbial count was Less than 10 cfu/gm (limit 1000 cfu/gm); Total yeast & mould count was Less than 10 cfu/gm (limit 100 cfu/gm).
Gentle, skin-friendly pH. The measured pH is 7.36, which is mildly acidic.
Sulphate-free and paraben-free. The published ingredient list contains no sulphates, parabens, silicones or mineral oil. It cleanses using milder amino-acid surfactants - coco-glucoside and glyceryl glucoside. Preservation uses phenoxyethanol.
Is it chemical free? No cosmetic is chemical-free - water itself is a chemical. This one is free from sulphates, parabens, silicones, mineral oil and any detectable lead, cadmium, arsenic, mercury or antimony.
What these results cover. The laboratory findings apply to the tested sample from batch AS5B002 and the parameters listed on this page. Skin tolerance is assessed separately, in the dermatological patch test certificate. NABL accredits laboratories, not products.
Key Findings at a Glance
Results of Analysis
Result is the measured outcome for this batch. Requirement / Limit is the specification where the standard defines one; a dash means it defines none. Test Method is the standard the laboratory followed.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Appearance | Light brown coloured highly viscous liquid | - | STRC/STP/F256 |
| Colour | Light brown | - | STRC/STP/F256 |
| Odour | Characteristic | - | STRC/STP/P044 |
| Chemical Parameters | |||
| pH | 7.36 | - | IS:6608:2004 |
| Total residue, % w/w | 14.86 | - | IS:6608:2004 |
| Total fatty matter, % w/w | 5.25 | - | IS:6608:2004 |
| Thermal Stability (45± 1C for 48 hour) | Passes the test | - | IS:6608:2004 |
| Water Content, % w/w | 84.14 | - | IS:2362:1993 |
| Specific Gravity | 1.026 | - | Indian Pharmacopoeia 2022 |
| Viscosity (Temp:25.3C,RPM:16.2,SPL-NO:L3,Torque:73.5%) cps | 6542 | - | Indian Pharmacopoeia 2022 |
| Heavy Metals | |||
| Lead (as Pb), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Cadmium (as Cd), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Arsenic (as As), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Mercury (as Hg), mg/kg | Not Detected (DL 0.1) | - | STRC/STP/P018 |
| Antimony (as Sb), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Microbial Counts | |||
| Total microbial count, cfu/gm | Less than 10 | NMT 1000 | IS:14648:2011 |
| Total yeast & mould count, cfu/gm | Less than 10 | NMT 100 | IS:14648:2011 |
| Pathogens | |||
| Escherichia coli, per gm | Absent | Shall be absent | IS:14648:2011 |
| Pseudomonas aeruginosa, per gm | Absent | Shall be absent | IS:14648:2011 |
| Staphylococcus aureus, per gm | Absent | Shall be absent | IS:14648:2011 |
| Candida albicans, per gm | Absent | Shall be absent | IS:14648:2011 |
Understanding These Tests for Bright+ Tone Up Sunscreen 50g
Physical & Organoleptic
On the tested sample, Bright+ Tone Up Sunscreen 50g was recorded as a light brown coloured highly viscous liquid, light brown in colour and with a characteristic odour.
These checks record what the laboratory observed in the sample as received.
Chemical Parameters
It also lists pH 7.36, total residue 14.86 % w/w, total fatty matter 5.25 % w/w, thermal Stability Passes the test, water Content 84.14 % w/w, specific Gravity 1.026 and viscosity 6542 cps, for which the standard sets no specification.
Chemical parameters are measured against the standard's specification where one exists.
Heavy Metals
In this report, Bright+ Tone Up Sunscreen 50g showed no detectable lead, cadmium, arsenic, mercury or antimony - each below the laboratory's detection limit of 0.25 mg/kg.
Heavy metals can enter a product through raw materials or manufacturing.
Microbial Counts
Bright+ Tone Up Sunscreen 50g recorded total microbial count Less than 10 cfu/gm against a limit of NMT 1000 cfu/gm and total yeast & mould count Less than 10 cfu/gm against a limit of NMT 100 cfu/gm.
These tests count viable microorganisms against the limits set by the standard.
Pathogens
In the tested sample of Bright+ Tone Up Sunscreen 50g, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans were reported Absent - not detected in the tested quantity.
Pathogen tests cover only the organisms listed, not all microorganisms.
Test Overview
| Report Title | Chemical and Microbiological Analysis - Bright+ Tone Up Sunscreen 50g |
| Parameters Measured | physical and organoleptic properties, chemical parameters, heavy metals, microbial counts and pathogens |
| Test Type | Laboratory chemical and microbiological analysis of a product sample |
| Test Methods | IS:6608:2004; IS:2362:1993; Indian Pharmacopoeia 2022; IS:14648:2011 |
| Sample Tested | AS5B002 (50 g x 5) |
About Bright+ Tone Up Sunscreen 50g
Super Light, Non-sticky Texture Like a tru bestie, this sunscreen will never put you in a sticky situation. Texture soooo lightweight and quick-absorbing, you'll forget it's even there. No drama, no fuss. Yeah, it's the mood. SPF 50+ PA++++ & Blue Light Protection This sunscreen is here to make your skin lit, not your UV index. Slay the day with SPF 50+ and PA++++ and a side of blue light protection, keeping you shielded to prevent sun damage. Instant Skin Tone Up With Zero White Cast No cap, our Bright+ Tone Up Sunscreen gives you radiant skin instantly, without the white cast. It's like a fi
Claims and Their Evidence
Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.
| Statement | Evidence / basis | Source |
|---|---|---|
| No detectable heavy metals | Lead, Cadmium, Arsenic, Mercury and Antimony reported Not Detected at a detection limit of 0.25 mg/kg. | Lab report 13034054/B |
| Within microbiological limits | Counts within the standard limits; specified pathogens reported Absent. | Lab report 13034054/B |
| Sulphate-free cleansing base | Formulated with coco-glucoside and glyceryl glucoside in place of SLS/SLES. | Product ingredient list |
| Paraben-free | No parabens in the published ingredient list. | Product ingredient list |
Report Details
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, Accreditation No. ) |
| Report No. | 13034054/B |
| Report Issue Date | 12/03/2025 |
| Testing Period | 03/03/2025 to 10/03/2025 |
| Batch Tested | AS5B002 (Mfg. 02/2025; use before 24 months) |
| Standards Referenced | IS:6608:2004; IS:2362:1993; Indian Pharmacopoeia 2022; IS:14648:2011 |
| Authorised Signatory | Shruti Vij, Technical Manager, Sigma Test & Research Centre |
What This Report Shows
What the results demonstrate
- Physical characteristics of the tested sample were recorded as observed by the laboratory.
- The listed heavy metals were below the laboratory's detection limit in the tested sample.
- The tested sample met the microbiological count limits of the referenced standard.
- The specified pathogenic microorganisms were reported Absent in the tested sample.
- Testing was performed by an NABL-accredited laboratory.
What the results do not demonstrate
- They do not certify the product; NABL accredits laboratories, not products.
- They do not establish overall safety or suitability for every individual.
- They do not prove any cosmetic-benefit or performance claim; those are addressed separately and on the product page.
- They do not cover parameters or organisms outside those listed.
- They apply to the tested sample from the stated batch, not necessarily to other batches.
Key Ingredients in Bright+ Tone Up Sunscreen 50g
Descriptions are the brand's own, from the product page.
| Ingredient | Brand description |
|---|---|
| Blueberry | "Blueberries are straight-up glow goals! Loaded with antioxidants and vitamins A, C and E, they're here to rescue your skin from all the dullness drama." |
| Kojic Acid | "This ingredient? Total game-changer. It fades dark spots, evens tone and smooths texture. It is basically your skin's cheat code for flawless skin." |
| Hyaluronic Acid | "The OG hydration hero, Hyaluronic Acid boosts moisture content & helps deliver intense hydration." |
Formulation at a Glance
From the ingredient list published on the product page. Not part of the laboratory report.
Cleansing System
| Component | Role in the formulation |
|---|---|
| Coco-Glucoside | Sugar-derived mild surfactant. |
Active Ingredients
| Component | Role in the formulation |
|---|---|
| Vaccinium Angustifolium (Blueberry) Fruit Extract | Blueberry or wild-berry fruit extract; antioxidant botanical. |
| Sodium Hyaluronate | Salt of hyaluronic acid; binds water for hydration. |
| Kojic Dipalmitate | Kojic acid derivative used in tone-focused formulas. |
| Trehalose | Sugar that binds water at the skin surface. |
| Glyceryl Glucoside | Sugar-derived humectant that supports surface hydration. |
| Tocopherol Acetate | Vitamin E; antioxidant that protects oils from oxidation. |
Moisturising and Emollient
| Component | Role in the formulation |
|---|---|
| Propanediol | Humectant and solvent that improves texture. |
| Glycerin | Humectant that draws water into the skin surface. |
| Dicaprylyl Carbonate | Light emollient with a dry finish. |
| Butylene Glycol | Humectant and solvent. |
UV Filters
| Component | Role in the formulation |
|---|---|
| Diethylamino Hydroxybenzoyl Hexyl Benzoate | UVA filter (Uvinul A Plus). |
| Ethylhexyl Triazone | UVB filter with high photostability. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine | Broad-spectrum UV filter (Tinosorb S). |
| Titanium Dioxide | Mineral UV filter; also used as a white pigment. |
Texture and Stability
| Component | Role in the formulation |
|---|---|
| Aqua | Solvent base of the formulation. |
| Sodium Gluconate | Plant-derived chelating agent that improves stability. |
| Copernicia Cerifera (Carnauba) Wax | Carnauba wax; plant wax that adds hardness. |
| Polysorbate 20 | Solubiliser that disperses oils in water. |
Preservative System
| Component | Role in the formulation |
|---|---|
| Phenoxyethanol | Broad-spectrum preservative used at low levels. |
Colourants
| Component | Role in the formulation |
|---|---|
| Synthetic Fluorphlogopite | Mineral that diffuses light for a soft finish. |
| Tin Oxide | Mineral used with pigments for a pearl effect. |
| Iron Oxides (CI 77499 | Approved cosmetic colourant. |
What the Formulation Leaves Out
| Excluded | Basis |
|---|---|
| No sulphates | Not present in the published ingredient list. |
| No parabens | Not present in the published ingredient list. |
| No silicones | Not present in the published ingredient list. |
| No mineral oil | Not present in the published ingredient list. |
Published Research on Key Actives
Published literature on each ingredient, not studies on this product.
| Ingredient | Published finding | Relevance to the formulation |
|---|---|---|
| Hyaluronic Acid | Hyaluronic acid is documented as a key water-binding molecule in skin hydration (Papakonstantinou E, et al. Dermatoendocrinol. 2012;4(3):253-258). | Supports hyaluronic acid or sodium hyaluronate as a hydrating agent. |
| Aloe Vera | Aloe vera has documented moisturising and soothing properties in dermatological use (Surjushe A, et al. Indian J Dermatol. 2008;53(4):163-166). | Supports aloe vera as a soothing and hydrating botanical. |
| Vitamin E | Vitamin E is reviewed as a major lipid-soluble antioxidant in skin, with photoprotective and moisturising roles (Keen MA, Hassan I. Indian Dermatol Online J. 2016;7(4):311-315). | Supports vitamin E as an antioxidant and emollient stabiliser. |
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of Bright+ Tone Up Sunscreen 50g. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report for Bright+ Tone Up Sunscreen 50g is available as issued by the laboratory. It carries the laboratory letterhead, the ULR number, and the authorised signatory's details.
The Tested Product
Bright+ Tone Up Sunscreen 50g
The results on this page come from laboratory testing of a sample from batch AS5B002. See the complete ingredient list, current offers and reviews on the product page. Learn more about Hyaluronic Acid and Blueberries. You can also explore the full product range or other products in this category.
View ProductFrequently Asked Questions
A: Yes. In this report, Lead, Cadmium, Arsenic, Mercury and Antimony were reported below the laboratory's stated detection limit of 0.25 mg/kg at Sigma Test & Research Centre, an NABL-accredited laboratory.
A: For the tested batch, microbial counts were reported within the limits of the referenced standard and the specified pathogens were reported Absent. These results indicate the tested sample met the referenced microbiological limits; they do not establish overall product safety.
A: The measured pH in this report is 7.36.
A: The published ingredient list for this product contains no sulphates, parabens, silicones or mineral oil. This is based on the ingredient list, not on the laboratory report, which covers contaminants and microbiological quality.
A: No. The report covers chemical and microbiological parameters on a sample from the stated batch. Performance and cosmetic-benefit claims are made by the brand on the product page and are not part of this laboratory report.
A: "Not Detected" means a substance was below the laboratory's stated detection limit using the specified method. "Absent" means a specified microorganism was not detected in the tested quantity using the referenced method.
A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test & Research Centre, an NABL-accredited laboratory on a sample of this product. It does not represent a product certification by NABL.
A: The report covers batch AS5B002 (manufactured 02/2025). The laboratory report states the tested sample as 50 g x 5. Results refer only to the tested sample and the parameters listed.
References
- IS:6608:2004. Bureau of Indian Standards.
- IS:2362:1993. Bureau of Indian Standards.
- Indian Pharmacopoeia 2022. Indian Pharmacopoeia Commission.
- IS:14648:2011. Bureau of Indian Standards.
- Sigma Test & Research Centre. Test report 13034054/B.
