Tested at an NABL-Accredited Laboratory

Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g: NABL Lab Test Report

NABL lab test report for Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g: heavy metals not detected, pathogens absent and pH 7.32. Batch AS5D001.

Testing LaboratorySigma Test & Research Centre
NABL Accreditation
Report No.13035453/B
Batch TestedAS5D001

Safety Summary: Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g

Is Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g safe? Yes. It was independently tested at Sigma Test & Research Centre. The tested sample, from batch AS5D001, was analysed against the limits in the referenced standards.

Free from lead, cadmium, arsenic, mercury and antimony. The report found no detectable lead, cadmium, arsenic, mercury or antimony - each was below the laboratory's detection limit of 0.25 mg/kg.

Free from harmful bacteria and fungi. Four organisms were tested: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. All were reported Absent. Total microbial count was Less than 10 cfu/gm (limit 1000 cfu/gm); Total yeast & mould count was Less than 10 cfu/gm (limit 100 cfu/gm).

Gentle, skin-friendly pH. The measured pH is 7.32, which is mildly acidic.

Sulphate-free and paraben-free. The published ingredient list contains no sulphates, parabens or mineral oil. It cleanses using milder amino-acid surfactants - betaine and glyceryl glucoside. Preservation uses phenoxyethanol.

Is it chemical free? No cosmetic is chemical-free - water itself is a chemical. This one is free from sulphates, parabens, mineral oil and any detectable lead, cadmium, arsenic, mercury or antimony.

What these results cover. The laboratory findings apply to the tested sample from batch AS5D001 and the parameters listed on this page. Skin tolerance is assessed separately, in the dermatological patch test certificate. NABL accredits laboratories, not products.

Key Findings at a Glance

🧪
Heavy Metals: Not Detected
Lead, Cadmium, Arsenic, Mercury and Antimony below the detection limit (0.25 mg/kg)
🦠
Pathogens: Absent
E. coli, P. aeruginosa, S. aureus and C. albicans - all reported Absent
📊
Microbial Count: Within Limits
Total count Less than 10 against a limit of NMT 1000

Results of Analysis

Result is the measured outcome for this batch. Requirement / Limit is the specification where the standard defines one; a dash means it defines none. Test Method is the standard the laboratory followed.

Parameter Result Requirement / Limit Test Method
Physical & Organoleptic
Appearance White highly viscous liquid - STRC/STP/F256
Colour White - STRC/STP/F256
Odour Characteristic - STRC/STP/P044
Chemical Parameters
pH 7.32 - IS:6608:2004
Total residue, % w/w 18.20 - IS:6608:2004
Total fatty matter, % w/w 8.45 - IS:6608:2004
Thermal Stability (45± 1C for 48 hour) Passes the test - IS:6608:2004
Water Content, % w/w 80.21 - IS:2362:1993
Specific Gravity 1.036 - Indian Pharmacopoeia 2022
Viscosity (Temp:26.5C,SPL-NO:L3,RPM:17,T orque:79.4%) cps 20563 - Indian Pharmacopoeia 2022
Heavy Metals
Lead (as Pb), mg/kg Not Detected (DL 0.25) - STRC/STP/P018
Cadmium (as Cd), mg/kg Not Detected (DL 0.25) - STRC/STP/P018
Arsenic (as As), mg/kg Not Detected (DL 0.25) - STRC/STP/P018
Mercury (as Hg), mg/kg Not Detected (DL 0.1) - STRC/STP/P018
Antimony (as Sb), mg/kg Not Detected (DL 0.25) - STRC/STP/P018
Microbial Counts
Total microbial count, cfu/gm Less than 10 NMT 1000 IS:14648:2011
Total yeast & mould count, cfu/gm Less than 10 NMT 100 IS:14648:2011
Pathogens
Escherichia coli, per gm Absent Shall be absent IS:14648:2011
Pseudomonas aeruginosa, per gm Absent Shall be absent IS:14648:2011
Staphylococcus aureus, per gm Absent Shall be absent IS:14648:2011
Candida albicans, per gm Absent Shall be absent IS:14648:2011

Understanding These Tests for Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g

Physical & Organoleptic

On the tested sample, Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g was recorded as a white highly viscous liquid, white in colour and with a characteristic odour.

These checks record what the laboratory observed in the sample as received.

Chemical Parameters

It also lists pH 7.32, total residue 18.20 % w/w, total fatty matter 8.45 % w/w, thermal Stability Passes the test, water Content 80.21 % w/w, specific Gravity 1.036 and viscosity 20563 cps, for which the standard sets no specification.

Chemical parameters are measured against the standard's specification where one exists.

Heavy Metals

In this report, Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g showed no detectable lead, cadmium, arsenic, mercury or antimony - each below the laboratory's detection limit of 0.25 mg/kg.

Heavy metals can enter a product through raw materials or manufacturing.

Microbial Counts

Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g recorded total microbial count Less than 10 cfu/gm against a limit of NMT 1000 cfu/gm and total yeast & mould count Less than 10 cfu/gm against a limit of NMT 100 cfu/gm.

These tests count viable microorganisms against the limits set by the standard.

Pathogens

In the tested sample of Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans were reported Absent - not detected in the tested quantity.

Pathogen tests cover only the organisms listed, not all microorganisms.

Test Overview

Report Title Chemical and Microbiological Analysis - Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g
Parameters Measured physical and organoleptic properties, chemical parameters, heavy metals, microbial counts and pathogens
Test Type Laboratory chemical and microbiological analysis of a product sample
Test Methods IS:6608:2004; IS:2362:1993; Indian Pharmacopoeia 2022; IS:14648:2011
Sample Tested AS5D001 (50 g x 5)

About Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g

Ultra-Light Fluid Texture The Detan+ Oil Balance Fluid Sunscreen melts into the skin quicker than your ice cream on a summer day. It leaves your skin free to breathe and protected. Layer it up or wear it as it is-the texture is great on its own! Infused with Cherry Tomato & Hyaluronic Acid Kicks out tan, locks hydration in. The perfect skincare partner! Cherry Tomatoes take the tan away & Hyaluronic Acid puts back the lost moisture. Balances Excess Oil Sunscreen that balances out the extra oil on your skin? A big yes! This sunscreen controls excess oil while keeping your pores unclogged, so yo

Claims and Their Evidence

Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.

Statement Evidence / basis Source
No detectable heavy metals Lead, Cadmium, Arsenic, Mercury and Antimony reported Not Detected at a detection limit of 0.25 mg/kg. Lab report 13035453/B
Within microbiological limits Counts within the standard limits; specified pathogens reported Absent. Lab report 13035453/B
Sulphate-free cleansing base Formulated with betaine and glyceryl glucoside in place of SLS/SLES. Product ingredient list
Paraben-free No parabens in the published ingredient list. Product ingredient list

Report Details

Testing Laboratory Sigma Test & Research Centre (NABL-accredited, Accreditation No. )
Report No. 13035453/B
Report Issue Date 26/04/2025
Testing Period 15/04/2025 to 22/04/2025
Batch Tested AS5D001 (Mfg. 04/2025; use before 24 months)
Standards Referenced IS:6608:2004; IS:2362:1993; Indian Pharmacopoeia 2022; IS:14648:2011
Authorised Signatory Shruti Vij, Technical Manager, Sigma Test & Research Centre

What This Report Shows

What the results demonstrate

  • Physical characteristics of the tested sample were recorded as observed by the laboratory.
  • The listed heavy metals were below the laboratory's detection limit in the tested sample.
  • The tested sample met the microbiological count limits of the referenced standard.
  • The specified pathogenic microorganisms were reported Absent in the tested sample.
  • Testing was performed by an NABL-accredited laboratory.

What the results do not demonstrate

  • They do not certify the product; NABL accredits laboratories, not products.
  • They do not establish overall safety or suitability for every individual.
  • They do not prove any cosmetic-benefit or performance claim; those are addressed separately and on the product page.
  • They do not cover parameters or organisms outside those listed.
  • They apply to the tested sample from the stated batch, not necessarily to other batches.

Key Ingredients in Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g

Descriptions are the brand's own, from the product page.

Ingredient Brand description
Cherry Tomato "Cherry Tomato Extract is basically a skincare overachiever-fighting tan, evening out your skin tone, and blocking free radicals like a pro. Packed with vitamin C and lycopene, it helps keep sun damage in check while giving your skin the hydration it deserves. Fresh, happy, and sun-protected? Yep, little tomato does it all."
Hyaluronic Acid "For the oh-so-plump look! The gold standard of hydration, Hyaluronic Acid binds water to skin cells and repairs its moisture barrier."

Formulation at a Glance

From the ingredient list published on the product page. Not part of the laboratory report.

Active Ingredients

Component Role in the formulation
Niacinamide Vitamin B3 derivative used for tone and barrier support.
Hyaluronic Acid Humectant that binds water in the upper skin layers.
Betaine Humectant derived from sugar beet.
Glyceryl Glucoside Sugar-derived humectant that supports surface hydration.
Solanum Lycopersicum (Cherry Tomato) Fruit Extract Cherry tomato extract; the lead botanical in Detan+ formulas.
Panthenol (Vitamin B5) Pro-vitamin B5 humectant supporting moisture and elasticity.

Moisturising and Emollient

Component Role in the formulation
Propanediol (Zemea) Humectant and solvent that improves texture.
Glycerin Humectant that draws water into the skin surface.
Dicaprylyl Carbonate Light emollient with a dry finish.
Butylene Glycol Humectant and solvent.

Conditioning Agents

Component Role in the formulation
Dimethicone Silicone that smooths the surface and adds slip.

UV Filters

Component Role in the formulation
Diethylamino Hydroxybenzoyl Hexyl Benzoate (Uvinul A Plus) UVA filter (Uvinul A Plus).
Ethylhexyl Triazone (Uvinul T 150) UVB filter with high photostability.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (Tinosorb S) Broad-spectrum UV filter (Tinosorb S).
Ethylhexyl Methoxycinnamate (Octinoxate) UVB filter.
Titanium Dioxide Mineral UV filter; also used as a white pigment.

Texture and Stability

Component Role in the formulation
Aqua (Water) Solvent base of the formulation.
Lecithin (Phospholipids) Phospholipid emulsifier of plant origin.
Polysorbate 20 Solubiliser that disperses oils in water.
Copernicia Cerifera (Carnauba) Wax Carnauba wax; plant wax that adds hardness.
Acrylates/C12-22 Alkyl Methacrylate Copolymer Polymer used to thicken or form films.

Preservative System

Component Role in the formulation
Phenoxyethanol Broad-spectrum preservative used at low levels.

What the Formulation Leaves Out

Excluded Basis
No sulphates Not present in the published ingredient list.
No parabens Not present in the published ingredient list.
No mineral oil Not present in the published ingredient list.

Published Research on Key Actives

Published literature on each ingredient, not studies on this product.

Ingredient Published finding Relevance to the formulation
Niacinamide Topical niacinamide has been reported to improve the appearance of ageing facial skin, including tone and texture (Bissett DL, et al. Dermatol Surg. 2005;31(7 Pt 2):860-865). Supports the inclusion of niacinamide in tone and barrier formulas.
Vitamin C Vitamin C contributes to collagen synthesis and antioxidant defence in skin (Pullar JM, et al. Nutrients. 2017;9(8):866). Supports vitamin C as an antioxidant and brightening active.
Hyaluronic Acid Hyaluronic acid is documented as a key water-binding molecule in skin hydration (Papakonstantinou E, et al. Dermatoendocrinol. 2012;4(3):253-258). Supports hyaluronic acid or sodium hyaluronate as a hydrating agent.
Panthenol (Pro-Vitamin B5) Topical dexpanthenol is documented to support hydration and barrier function (Proksch E, et al. Am J Clin Dermatol. 2009;10(6):359-367). Supports panthenol for moisture retention and elasticity.
Aloe Vera Aloe vera has documented moisturising and soothing properties in dermatological use (Surjushe A, et al. Indian J Dermatol. 2008;53(4):163-166). Supports aloe vera as a soothing and hydrating botanical.

Dermatological Patch Test Certificate

This NABL lab test report covers the chemical and microbiological analysis of Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.

View the Original Lab Report

The complete original report for Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g is available as issued by the laboratory. It carries the laboratory letterhead, the ULR number, and the authorised signatory's details.

View Report PDF

The Tested Product

Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g

Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g

The results on this page come from laboratory testing of a sample from batch AS5D001. See the complete ingredient list, current offers and reviews on the product page. Learn more about Hyaluronic Acid and Cherry Tomato. You can also explore the full product range or other products in this category.

View Product

Frequently Asked Questions

Q: Is Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g tested for heavy metals?

A: Yes. In this report, Lead, Cadmium, Arsenic, Mercury and Antimony were reported below the laboratory's stated detection limit of 0.25 mg/kg at Sigma Test & Research Centre, an NABL-accredited laboratory.

Q: Is Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g microbiologically safe?

A: For the tested batch, microbial counts were reported within the limits of the referenced standard and the specified pathogens were reported Absent. These results indicate the tested sample met the referenced microbiological limits; they do not establish overall product safety.

Q: What is the pH of Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g?

A: The measured pH in this report is 7.32.

Q: Is Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g free from sulphates and parabens?

A: The published ingredient list for this product contains no sulphates, parabens or mineral oil. This is based on the ingredient list, not on the laboratory report, which covers contaminants and microbiological quality.

Q: Does this report prove Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g works?

A: No. The report covers chemical and microbiological parameters on a sample from the stated batch. Performance and cosmetic-benefit claims are made by the brand on the product page and are not part of this laboratory report.

Q: What do "Not Detected" and "Absent" mean in this report?

A: "Not Detected" means a substance was below the laboratory's stated detection limit using the specified method. "Absent" means a specified microorganism was not detected in the tested quantity using the referenced method.

Q: Does NABL certify this product?

A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test & Research Centre, an NABL-accredited laboratory on a sample of this product. It does not represent a product certification by NABL.

Q: Which batch does this report cover?

A: The report covers batch AS5D001 (manufactured 04/2025). The laboratory report states the tested sample as 50 g x 5. Results refer only to the tested sample and the parameters listed.

References

  1. IS:6608:2004. Bureau of Indian Standards.
  2. IS:2362:1993. Bureau of Indian Standards.
  3. Indian Pharmacopoeia 2022. Indian Pharmacopoeia Commission.
  4. IS:14648:2011. Bureau of Indian Standards.
  5. Sigma Test & Research Centre. Test report 13035453/B.

Report Verification

Testing Laboratory

Sigma Test & Research Centre

Report No.

13035453/B

Batch Tested

AS5D001 (Mfg. 04/2025)

Report Date

26/04/2025

Results refer only to the tested sample from the stated batch and the parameters listed on this page.

View Product
Disclaimer: This page reproduces the results of laboratory analysis performed at Sigma Test & Research Centre on a sample from batch AS5D001 of Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g. Test results refer only to the tested sample and the listed parameters. Formulations may be updated over time; refer to the product label for current information. This page is for informational purposes and does not constitute medical or regulatory advice, and does not represent a product certification by NABL.