Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml: NABL Lab Test Report
NABL lab test report for Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml: heavy metals not detected and pH 5.59. Batch AN4H012.
Safety Summary: Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml
Is Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml safe? Yes. It was independently tested at Sigma Test & Research Centre, a laboratory accredited by NABL (Accreditation No. TC-5369). The tested sample, from batch AN4H012, met every safety limit the laboratory checked.
Free from lead, cadmium, arsenic, mercury and antimony. The report found no detectable lead, cadmium, arsenic, mercury or antimony - each was below the laboratory's detection limit of 0.25 mg/kg.
Free from harmful bacteria and fungi. Total microbial count was Less than 10 cfu/gm (limit 1000 cfu/gm); Total yeast & mould count was Less than 10 cfu/gm (limit 100 cfu/gm).
Gentle, skin-friendly pH. The measured pH is 5.59, which is mildly acidic.
Sulphate-free and paraben-free. The published ingredient list contains no sulphates, parabens, silicones or mineral oil. It cleanses using milder amino-acid surfactants - betaine, glyceryl glucoside and sodium polyacryloyldimethyl taurate. Preservation uses sodium levulinate (and) potassium sorbate and ethylhexylglycerin.
Is it chemical free? No cosmetic is chemical-free - water itself is a chemical. This one is free from sulphates, parabens, silicones, mineral oil and any detectable lead, cadmium, arsenic, mercury or antimony.
What these results cover. The laboratory findings apply to the tested sample from batch AN4H012 and the parameters listed on this page. Skin tolerance is assessed separately, in the dermatological patch test certificate. NABL accredits laboratories, not products.
Key Findings at a Glance
Results of Analysis
Result is the measured outcome for this batch. Requirement / Limit is the specification where the standard defines one; a dash means it defines none. Test Method is the standard the laboratory followed.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Appearance | Clear colourless viscous liquid | - | STRC/STP/F256 |
| Colour | Colourless | - | STRC/STP/F256 |
| Odour | Characteristic | - | STRC/STP/P044 |
| Chemical Parameters | |||
| pH | 5.59 | - | STRC/STP/P077 |
| 1,4 Dioxane, mg/kg | Not Detected (DL 1.0) | - | Indian Pharmacopoeia (Chapter No. 2.4.40) |
| Density, g/ml | 1.032 | - | Indian Pharmacopoeia 2022 |
| Total residue, % w/w | 10.28 | - | IS:6608:2004 |
| Heavy Metals | |||
| Lead (as Pb), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Cadmium (as Cd), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Arsenic (as As), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Mercury (as Hg), mg/kg | Not Detected (DL 0.1) | - | STRC/STP/P018 |
| Antimony (as Sb), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Microbial Counts | |||
| Total microbial count, cfu/gm | Less than 10 | NMT 1000 | IS:14648:2011 |
| Total yeast & mould count, cfu/gm | Less than 10 | NMT 100 | IS:14648:2011 |
Understanding These Tests for Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml
Physical & Organoleptic
On the tested sample, Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml was recorded as a clear colourless viscous liquid, colourless in colour and with a characteristic odour.
These checks record what the laboratory observed in the sample as received.
Chemical Parameters
It also lists pH 5.59, 1,4 Dioxane Not Detected, density, g/ml 1.032 and total residue 10.28 % w/w, for which the standard sets no specification.
Chemical parameters are measured against the standard's specification where one exists.
Heavy Metals
In this report, Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml showed no detectable lead, cadmium, arsenic, mercury or antimony - each below the laboratory's detection limit of 0.25 mg/kg.
Heavy metals can enter a product through raw materials or manufacturing.
Microbial Counts
Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml recorded total microbial count Less than 10 cfu/gm against a limit of NMT 1000 cfu/gm and total yeast & mould count Less than 10 cfu/gm against a limit of NMT 100 cfu/gm.
These tests count viable microorganisms against the limits set by the standard.
Test Overview
| Report Title | Chemical and Microbiological Analysis - Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml |
| Parameters Measured | physical and organoleptic properties, chemical parameters, heavy metals and microbial counts |
| Test Type | Laboratory chemical and microbiological analysis of a product sample |
| Test Methods | Indian Pharmacopoeia 2022; IS:6608:2004; IS:14648:2011 |
| Sample Tested | AN4H012 (50 ml x 3) |
About Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml
Power of 20x* Alpha Arbutin Dark spots? Illuminate+ Luminous Essence Serum is here to the rescue! Infused with 20x* Alpha Arbutin, this super serum fights hyperpigmentation & fades away dark spots. Fights Pigmentation & Uneven Skin Tone Pigmentation out, clear skin in! Powered with a blend of Wild Berries & Alpha Arbutin, this Luminous Essence Serum fades pigmentation & evens skin tone with regular use. Deeply Hydrates & Plumps Skin Serum drying your skin out? Powered with the hydrating benefits of Hyaluronic Acid, this essence serum ensures your skin remains soft & plump. Ultra-Light & Non-St
Claims and Their Evidence
Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.
| Statement | Evidence / basis | Source |
|---|---|---|
| No detectable heavy metals | Lead, Cadmium, Arsenic, Mercury and Antimony reported Not Detected at a detection limit of 0.25 mg/kg. | Lab report 13029073/A |
| Within microbiological limits | Counts within the standard limits; specified pathogens reported Absent. | Lab report 13029073/B |
| Sulphate-free cleansing base | Formulated with betaine, glyceryl glucoside and sodium polyacryloyldimethyl taurate in place of SLS/SLES. | Product ingredient list |
| Paraben-free | No parabens in the published ingredient list. | Product ingredient list |
Report Details
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, Accreditation No. TC-5369) |
| ULR Number | TC536924000009338F |
| Report No. | 13029073/A, 13029073/B |
| Report Issue Date | 20/09/2024 |
| Testing Period | 10/09/2024 to 18/09/2024 |
| Batch Tested | AN4H012 (Mfg. 08/2024; use before 24 months) |
| Standards Referenced | Indian Pharmacopoeia 2022; IS:6608:2004; IS:14648:2011 |
| Authorised Signatory | Vinit Sharma, Person Incharge, Sigma Test & Research Centre |
What This Report Shows
What the results demonstrate
- Physical characteristics of the tested sample were recorded as observed by the laboratory.
- Measured chemical parameters that carry a specification fell within the referenced limits.
- The listed heavy metals were below the laboratory's detection limit in the tested sample.
- The tested sample met the microbiological count limits of the referenced standard.
- Testing was performed by an NABL-accredited laboratory.
What the results do not demonstrate
- They do not certify the product; NABL accredits laboratories, not products.
- They do not establish overall safety or suitability for every individual.
- They do not prove any cosmetic-benefit or performance claim; those are addressed separately and on the product page.
- They do not cover parameters or organisms outside those listed.
- They apply to the tested sample from the stated batch, not necessarily to other batches.
Formulation at a Glance
From the ingredient list published on the product page. Not part of the laboratory report.
Active Ingredients
| Component | Role in the formulation |
|---|---|
| Betaine | Humectant derived from sugar beet. |
| Alpha Arbutin | Arbutin, used in tone-focused formulas. |
| Glycolic Acid | Alpha-hydroxy acid used for surface exfoliation. |
| Sodium Hyaluronate Crosspolymer | Salt of hyaluronic acid; binds water for hydration. |
| Xylitol | Sugar-alcohol humectant supporting surface hydration. |
| Glyceryl Glucoside | Sugar-derived humectant that supports surface hydration. |
Moisturising and Emollient
| Component | Role in the formulation |
|---|---|
| Propanediol | Humectant and solvent that improves texture. |
| Pentylene Glycol | Humectant that also supports preservation. |
| Ethylhexylglycerin | Humectant that draws water into the skin surface. |
| Butylene Glycol | Humectant and solvent. |
Texture and Stability
| Component | Role in the formulation |
|---|---|
| Aqua | Solvent base of the formulation. |
| Sodium Polyacrylate | Polymer thickener and emulsion stabiliser. |
| Xanthan Gum | Natural thickener that stabilises the formulation. |
| Disodium EDTA | Chelating agent that stabilises the formula against metal ions. |
Preservative System
| Component | Role in the formulation |
|---|---|
| Sodium Levulinate (and) Potassium Sorbate | Preservative that works with sodium benzoate. |
What the Formulation Leaves Out
| Excluded | Basis |
|---|---|
| No sulphates | Not present in the published ingredient list. |
| No parabens | Not present in the published ingredient list. |
| No silicones | Not present in the published ingredient list. |
| No mineral oil | Not present in the published ingredient list. |
Published Research on Key Actives
Published literature on each ingredient, not studies on this product.
| Ingredient | Published finding | Relevance to the formulation |
|---|---|---|
| Vitamin C | Vitamin C contributes to collagen synthesis and antioxidant defence in skin (Pullar JM, et al. Nutrients. 2017;9(8):866). | Supports vitamin C as an antioxidant and brightening active. |
| Hyaluronic Acid | Hyaluronic acid is documented as a key water-binding molecule in skin hydration (Papakonstantinou E, et al. Dermatoendocrinol. 2012;4(3):253-258). | Supports hyaluronic acid or sodium hyaluronate as a hydrating agent. |
| Glycolic Acid | Glycolic acid peels are documented for surface renewal and pigmentation concerns (Sharad J. Clin Cosmet Investig Dermatol. 2013;6:281-288). | Supports glycolic acid as a surface-exfoliating active. |
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report for Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml is available as issued by the laboratory. It carries the laboratory letterhead, the ULR number, and the authorised signatory's details.
The Tested Product
Illuminate+ 20x Alpha Arbutin Luminous Essence Serum 50ml
The results on this page come from laboratory testing of a sample from batch AN4H012. See the complete ingredient list, current offers and reviews on the product page. Learn more about Hyaluronic Acid and Alpha Arbutin. You can also explore the full product range or other products in this category.
View ProductFrequently Asked Questions
A: Yes. In this report, Lead, Cadmium, Arsenic, Mercury and Antimony were reported below the laboratory's stated detection limit of 0.25 mg/kg at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-5369).
A: For the tested batch, microbial counts were reported within the limits of the referenced standard and the specified pathogens were reported Absent. These results indicate the tested sample met the referenced microbiological limits; they do not establish overall product safety.
A: The measured pH in this report is 5.59.
A: The published ingredient list for this product contains no sulphates, parabens, silicones or mineral oil. This is based on the ingredient list, not on the laboratory report, which covers contaminants and microbiological quality.
A: No. The report covers chemical and microbiological parameters on a sample from the stated batch. Performance and cosmetic-benefit claims are made by the brand on the product page and are not part of this laboratory report.
A: It means the substance was below the laboratory's stated detection limit using the specified method, so it was not found at or above that limit in the tested sample.
A: A ULR (Unique Lab Report) number is a one-of-a-kind identifier that NABL-accredited laboratories print on every test report, making it traceable. The ULR for this report is TC536924000009338F. The original report PDF linked on this page carries the laboratory letterhead and authorised signatory details.
A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-5369) on a sample of this product. It does not represent a product certification by NABL.
A: The report covers batch AN4H012 (manufactured 08/2024). The laboratory report states the tested sample as 50 ml x 3. Results refer only to the tested sample and the parameters listed.
References
- Indian Pharmacopoeia 2022. Indian Pharmacopoeia Commission.
- IS:6608:2004. Bureau of Indian Standards.
- IS:14648:2011. Bureau of Indian Standards.
- Sharad J. Clin Cosmet Investig Dermatol. 2013;6:281-288.
- Sigma Test & Research Centre. Test reports 13029073/A, 13029073/B.
