Radiance+ Concentrate Face Serum 30 ml: NABL Lab Test Report
NABL lab test report for Radiance+ Concentrate Face Serum 30 ml: heavy metals not detected and pH 7.10. Batch AQL-025.
Safety Summary: Radiance+ Concentrate Face Serum 30 ml
Is Radiance+ Concentrate Face Serum 30 ml safe? Yes. It was independently tested at Sigma Test & Research Centre, a laboratory accredited by NABL (Accreditation No. TC-5369). The tested sample, from batch AQL-025, met every safety limit the laboratory checked.
Free from lead, cadmium, arsenic, mercury and antimony. The report found no detectable lead, cadmium, arsenic, mercury or antimony - each was below the laboratory's detection limit of 0.25 mg/kg.
Gentle, skin-friendly pH. The measured pH is 7.10, which is mildly acidic.
Sulphate-free and paraben-free. The published ingredient list contains no sulphates, parabens or mineral oil. Preservation uses potassium sorbate, phenoxyethanol and sodium benzoate.
Is it chemical free? No cosmetic is chemical-free - water itself is a chemical. This one is free from sulphates, parabens, mineral oil and any detectable lead, cadmium, arsenic, mercury or antimony.
What these results cover. The laboratory findings apply to the tested sample from batch AQL-025 and the parameters listed on this page. Skin tolerance is assessed separately, in the dermatological patch test certificate. NABL accredits laboratories, not products.
Key Findings at a Glance
Results of Analysis
Result is the measured outcome for this batch. Requirement / Limit is the specification where the standard defines one; a dash means it defines none. Test Method is the standard the laboratory followed.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Description | Clear colourless viscous liquid | - | STRC/STP/P049 |
| Colour | Colourless | - | STRC/STP/P049 |
| Odour | Characteristic | - | STRC/STP/P044 |
| Chemical Parameters | |||
| pH | 7.10 | - | STRC/STP/P031 |
| 1,4 Dioxane, ppm | Not Detected (DL 1.0) | - | STRC/STP/P022 |
| Density, g/ml.. | 1.032 | - | STRC/STP/P047 |
| Total residue, % w/w | 11.20 | - | STRC/STP/P041 |
| Viscosity (Temp.25.2 C, RPM 60, SPL No.2), cps | 174.18 | - | STRC/STP/P033 |
| Heavy Metals | |||
| Lead (as Pb), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Cadmium (as Cd), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Arsenic (as As), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Mercury (as Hg), ppm | Not Detected (DL 0.1) | - | STRC/STP/P018 |
| Antimony (as Sb), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
Understanding These Tests for Radiance+ Concentrate Face Serum 30 ml
Physical & Organoleptic
On the tested sample, Radiance+ Concentrate Face Serum 30 ml was recorded as description Clear colourless viscous liquid, colourless in colour and with a characteristic odour.
These checks record what the laboratory observed in the sample as received.
Chemical Parameters
It also lists pH 7.10, 1,4 Dioxane Not Detected, density, g/ml.. 1.032, total residue 11.20 % w/w and viscosity 174.18 cps, for which the standard sets no specification.
Chemical parameters are measured against the standard's specification where one exists.
Heavy Metals
In this report, Radiance+ Concentrate Face Serum 30 ml showed no detectable lead, cadmium, arsenic, mercury or antimony - each below the laboratory's detection limit of 0.25 mg/kg.
Heavy metals can enter a product through raw materials or manufacturing.
Test Overview
| Report Title | Chemical and Microbiological Analysis - Radiance+ Concentrate Face Serum 30 ml |
| Parameters Measured | physical and organoleptic properties, chemical parameters and heavy metals |
| Test Type | Laboratory chemical and microbiological analysis of a product sample |
| Test Methods | |
| Sample Tested | AQL-025 (30ml x 10) |
About Radiance+ Concentrate Face Serum 30 ml
Reduces Acne Marks & Dark Spots Formulated with Niacinamide, Radiance+ Concentrate Face Serum reduces acne marks and fades dark spots and blemishes, leaving a perfectly hydrated and moisturized skin. Reduces and Tightens the Pores Watermelon, with its super hydrating properties actively controls excessive oil production, hydrates the skin, and tightens the pores to give you a smoother, softer skin texture. Makes Skin Bright & Radiant Enriched with Hyaluronic Acid and Aquaporin stimulating ingredients, Radiance+ Concentrate Face Serum hydrates and brightens the skin, making it feel soft, dewy,
Claims and Their Evidence
Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.
| Statement | Evidence / basis | Source |
|---|---|---|
| No detectable heavy metals | Lead, Cadmium, Arsenic, Mercury and Antimony reported Not Detected at a detection limit of 0.25 mg/kg. | Lab report 13007874/A |
| Sulphate-free cleansing base | No SLS or SLES in the published ingredient list. | Product ingredient list |
| Paraben-free | No parabens in the published ingredient list. | Product ingredient list |
Report Details
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, Accreditation No. TC-5369) |
| ULR Number | TC536922000009835F |
| Report No. | 13007874/A, 13007874/B |
| Report Issue Date | 03/11/2022 |
| Testing Period | 18/10/2022 to 27/10/2022 |
| Batch Tested | AQL-025 (Mfg. 08/2022; use before 18) |
| Authorised Signatory | Vinit Sharma, Person Incharge, Sigma Test & Research Centre |
What This Report Shows
What the results demonstrate
- Physical characteristics of the tested sample were recorded as observed by the laboratory.
- Measured chemical parameters that carry a specification fell within the referenced limits.
- The listed heavy metals were below the laboratory's detection limit in the tested sample.
- Testing was performed by an NABL-accredited laboratory.
What the results do not demonstrate
- They do not certify the product; NABL accredits laboratories, not products.
- They do not establish overall safety or suitability for every individual.
- They do not prove any cosmetic-benefit or performance claim; those are addressed separately and on the product page.
- They do not cover parameters or organisms outside those listed.
- They apply to the tested sample from the stated batch, not necessarily to other batches.
Key Ingredients in Radiance+ Concentrate Face Serum 30 ml
Descriptions are the brand's own, from the product page.
| Ingredient | Brand description |
|---|---|
| Watermelon | "This refreshing fruit is loaded with H2O, antioxidants, and citrulline. Its cooling and ultra-hydrating properties make your skin glow while regulating excess oil production." |
| Niacinamide | "Also known as Vitamin B3, Niacinamide works wonders in visibly minimizing enlarged pores, improving skin tone, fading acne marks, and reducing fine lines and wrinkles." |
| Hyaluronic Acid | "For the oh-so-plump look! The gold standard of hydration, Hyaluronic Acid binds water to skin cells and repairs moisture barriers." |
Formulation at a Glance
From the ingredient list published on the product page. Not part of the laboratory report.
Active Ingredients
| Component | Role in the formulation |
|---|---|
| Niacinamide | Vitamin B3 derivative used for tone and barrier support. |
| Trehalose | Sugar that binds water at the skin surface. |
| Hydroxyethyl Urea | Humectant that helps the skin hold water. |
| Sodium Hyaluronate (Hyaluronic Acid) | Salt of hyaluronic acid; binds water for hydration. |
Moisturising and Emollient
| Component | Role in the formulation |
|---|---|
| 3 Butylene Glycol | Humectant and solvent. |
| Glycerin | Humectant that draws water into the skin surface. |
Conditioning Agents
| Component | Role in the formulation |
|---|---|
| PEG-12 Dimethicone | Silicone that smooths the surface and adds slip. |
Texture and Stability
| Component | Role in the formulation |
|---|---|
| Aqua | Solvent base of the formulation. |
| Lecithin | Phospholipid emulsifier of plant origin. |
| Citric Acid | Adjusts the pH of the formulation. |
| Sodium Polyacrylate Starch | Polymer thickener and emulsion stabiliser. |
| Disodium EDTA | Chelating agent that stabilises the formula against metal ions. |
Preservative System
| Component | Role in the formulation |
|---|---|
| Potassium Sorbate | Preservative that works with sodium benzoate. |
| Phenoxyethanol | Broad-spectrum preservative used at low levels. |
| Sodium Benzoate | Preservative effective in acidic formulations. |
What the Formulation Leaves Out
| Excluded | Basis |
|---|---|
| No sulphates | Not present in the published ingredient list. |
| No parabens | Not present in the published ingredient list. |
| No mineral oil | Not present in the published ingredient list. |
Published Research on Key Actives
Published literature on each ingredient, not studies on this product.
| Ingredient | Published finding | Relevance to the formulation |
|---|---|---|
| Niacinamide | Topical niacinamide has been reported to improve the appearance of ageing facial skin, including tone and texture (Bissett DL, et al. Dermatol Surg. 2005;31(7 Pt 2):860-865). | Supports the inclusion of niacinamide in tone and barrier formulas. |
| Hyaluronic Acid | Hyaluronic acid is documented as a key water-binding molecule in skin hydration (Papakonstantinou E, et al. Dermatoendocrinol. 2012;4(3):253-258). | Supports hyaluronic acid or sodium hyaluronate as a hydrating agent. |
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of Radiance+ Concentrate Face Serum 30 ml. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report for Radiance+ Concentrate Face Serum 30 ml is available as issued by the laboratory. It carries the laboratory letterhead, the ULR number, and the authorised signatory's details.
The Tested Product
Radiance+ Concentrate Face Serum 30 ml
The results on this page come from laboratory testing of a sample from batch AQL-025. See the complete ingredient list, current offers and reviews on the product page. Learn more about Hyaluronic Acid and Niacinamide. You can also explore the full product range or other products in this category.
View ProductFrequently Asked Questions
A: Yes. In this report, Lead, Cadmium, Arsenic, Mercury and Antimony were reported below the laboratory's stated detection limit of 0.25 mg/kg at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-5369).
A: The measured pH in this report is 7.10.
A: The published ingredient list for this product contains no sulphates, parabens or mineral oil. This is based on the ingredient list, not on the laboratory report, which covers contaminants and microbiological quality.
A: No. The report covers chemical and microbiological parameters on a sample from the stated batch. Performance and cosmetic-benefit claims are made by the brand on the product page and are not part of this laboratory report.
A: It means the substance was below the laboratory's stated detection limit using the specified method, so it was not found at or above that limit in the tested sample.
A: A ULR (Unique Lab Report) number is a one-of-a-kind identifier that NABL-accredited laboratories print on every test report, making it traceable. The ULR for this report is TC536922000009835F. The original report PDF linked on this page carries the laboratory letterhead and authorised signatory details.
A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-5369) on a sample of this product. It does not represent a product certification by NABL.
A: The report covers batch AQL-025 (manufactured 08/2022). The laboratory report states the tested sample as 30ml x 10. Results refer only to the tested sample and the parameters listed.
References
- Sigma Test & Research Centre. Test reports 13007874/A, 13007874/B.
