Radiance+ Juicy Dew Drops 30 ml: NABL Lab Test Report
NABL lab test report for Radiance+ Juicy Dew Drops 30 ml: heavy metals not detected, pathogens absent and pH 5.93. Batch AH0178.
Safety Summary: Radiance+ Juicy Dew Drops 30 ml
Is Radiance+ Juicy Dew Drops 30 ml safe? Yes. It was independently tested at Sigma Test & Research Centre, a laboratory accredited by NABL (Accreditation No. TC-5369). The tested sample, from batch AH0178, was analysed against the limits in the referenced standards.
Free from lead, cadmium, arsenic and mercury. The report found no detectable lead, cadmium, arsenic or mercury - each was below the laboratory's detection limit of 0.25 mg/kg.
Free from harmful bacteria and fungi. Four organisms were tested: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. All were reported Absent. Total microbial count was Less than 10 cfu/gm (limit 1000 cfu/gm); Total yeast & mould count was Less than 10 cfu/gm (limit 100 cfu/gm).
Gentle, skin-friendly pH. The measured pH is 5.93, which is mildly acidic.
Sulphate-free and paraben-free. The published ingredient list contains no sulphates, parabens, silicones or mineral oil. It cleanses using milder amino-acid surfactants - glyceryl glucoside and ammonium acryloyldimethyltaurate/carboxyethyl acrylate crosspolymer. Preservation uses phenoxyethanol.
Is it chemical free? No cosmetic is chemical-free - water itself is a chemical. This one is free from sulphates, parabens, silicones, mineral oil and any detectable lead, cadmium, arsenic or mercury.
What these results cover. The laboratory findings apply to the tested sample from batch AH0178 and the parameters listed on this page. Skin tolerance is assessed separately, in the dermatological patch test certificate. NABL accredits laboratories, not products.
Key Findings at a Glance
Results of Analysis
Result is the measured outcome for this batch. Requirement / Limit is the specification where the standard defines one; a dash means it defines none. Test Method is the standard the laboratory followed.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Appearance | Purple coloured viscous liquid | - | STRC/STP/F256 |
| Colour | Purple | - | STRC/STP/F256 |
| Odour | Characteristic | - | STRC/STP/P044 |
| Chemical Parameters | |||
| pH | 5.93 | - | IS:2711:1979 |
| Total residue, % w/w | 9.92 | - | IS:6608:2004 |
| Density, g/ml | 1.015 | - | Indian Pharmacopoeia 2018 |
| Viscosity(Temp: 24.5C, RPM: 30, Spl-No: 64), cps | 3927 | - | Indian Pharmacopoeia 2018 |
| Specific gravity | 1.018 | - | Indian Pharmacopoeia 2018 |
| Heavy Metals | |||
| Lead (as Pb), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Cadmium (as Cd), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Arsenic (as As), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Mercury (as Hg), ppm | Not Detected (DL 0.1) | - | STRC/STP/P018 |
| Microbial Counts | |||
| Total microbial count, cfu/gm | Less than 10 | NMT 1000 | IS:14648:2011 |
| Total yeast & mould count, cfu/gm | Less than 10 | NMT 100 | IS:14648:2011 |
| Pathogens | |||
| Escherichia coli, per gm | Absent | - | IS:14648:2011 |
| Pseudomonas aeruginosa, per gm | Absent | - | IS:14648:2011 |
| Staphylococcus aureus, per gm | Absent | - | IS:14648:2011 |
| Candida albicans, per gm | Absent | - | IS:14648:2011 |
Understanding These Tests for Radiance+ Juicy Dew Drops 30 ml
Physical & Organoleptic
On the tested sample, Radiance+ Juicy Dew Drops 30 ml was recorded as a purple coloured viscous liquid, purple in colour and with a characteristic odour.
These checks record what the laboratory observed in the sample as received.
Chemical Parameters
It also lists pH 5.93, total residue 9.92 % w/w, density, g/ml 1.015, viscosity 3927 cps and specific gravity 1.018, for which the standard sets no specification.
Chemical parameters are measured against the standard's specification where one exists.
Heavy Metals
In this report, Radiance+ Juicy Dew Drops 30 ml showed no detectable lead, cadmium, arsenic or mercury - each below the laboratory's detection limit of 0.1 mg/kg.
Heavy metals can enter a product through raw materials or manufacturing.
Microbial Counts
Radiance+ Juicy Dew Drops 30 ml recorded total microbial count Less than 10 cfu/gm against a limit of NMT 1000 cfu/gm and total yeast & mould count Less than 10 cfu/gm against a limit of NMT 100 cfu/gm.
These tests count viable microorganisms against the limits set by the standard.
Pathogens
In the tested sample of Radiance+ Juicy Dew Drops 30 ml, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans were reported Absent - not detected in the tested quantity.
Pathogen tests cover only the organisms listed, not all microorganisms.
Test Overview
| Report Title | Chemical and Microbiological Analysis - Radiance+ Juicy Dew Drops 30 ml |
| Parameters Measured | physical and organoleptic properties, chemical parameters, heavy metals, microbial counts and pathogens |
| Test Type | Laboratory chemical and microbiological analysis of a product sample |
| Test Methods | IS:2711:1979; IS:6608:2004; Indian Pharmacopoeia 2018; IS:14648:2011 |
| Sample Tested | AH0178 (30 ml x 10) |
About Radiance+ Juicy Dew Drops 30 ml
Instant Luminous Radiance With Radiance+ Juicy Dew Drops, you get an instant highlight to your unique features with a soft radiance that comes from within. For Shimmery Look Get party ready in a blink! This magical makeup serum works perfectly as a liquid highlighter to give your unique features an instant shimmery shine. Dewy & Glossy Finish Be the Boss of Gloss with Radiance+ Juicy Dew Drops. It's time to turn heads with your dewy, glossy, radiant skin. Just a few dabs and you're ready to look fab! Lightweight & Hydrating Rich in ultra-hydrating ingredients like Watermelon, Niacinamide, and
Claims and Their Evidence
Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.
| Statement | Evidence / basis | Source |
|---|---|---|
| No detectable heavy metals | Lead, Cadmium, Arsenic and Mercury reported Not Detected at a detection limit of 0.25 mg/kg. | Lab report 13010094/A |
| Within microbiological limits | Counts within the standard limits; specified pathogens reported Absent. | Lab report 13010094/B |
| Sulphate-free cleansing base | Formulated with glyceryl glucoside and ammonium acryloyldimethyltaurate/carboxyethyl acrylate crosspolymer in place of SLS/SLES. | Product ingredient list |
| Paraben-free | No parabens in the published ingredient list. | Product ingredient list |
Report Details
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, Accreditation No. TC-5369) |
| ULR Number | TC536923000000919F |
| Report No. | 13010094/A, 13010094/B |
| Report Issue Date | 25/01/2023 |
| Testing Period | 11/01/2023 to 17/01/2023 |
| Batch Tested | AH0178 (Mfg. 12/2022; use before 18 months) |
| Standards Referenced | IS:2711:1979; IS:6608:2004; Indian Pharmacopoeia 2018; IS:14648:2011 |
| Authorised Signatory | Vinit Sharma, Person Incharge, Sigma Test & Research Centre |
What This Report Shows
What the results demonstrate
- Physical characteristics of the tested sample were recorded as observed by the laboratory.
- The listed heavy metals were below the laboratory's detection limit in the tested sample.
- The tested sample met the microbiological count limits of the referenced standard.
- The specified pathogenic microorganisms were reported Absent in the tested sample.
- Testing was performed by an NABL-accredited laboratory.
What the results do not demonstrate
- They do not certify the product; NABL accredits laboratories, not products.
- They do not establish overall safety or suitability for every individual.
- They do not prove any cosmetic-benefit or performance claim; those are addressed separately and on the product page.
- They do not cover parameters or organisms outside those listed.
- They apply to the tested sample from the stated batch, not necessarily to other batches.
Key Ingredients in Radiance+ Juicy Dew Drops 30 ml
Descriptions are the brand's own, from the product page.
| Ingredient | Brand description |
|---|---|
| Watermelon | "This refreshing fruit is loaded with H 2 O, antioxidants, and citrulline. Its cooling and ultra-hydrating properties make your skin radiant while regulating excess oil production." |
| Niacinamide | "Also known as Vitamin B3, Niacinamide works wonders in visibly minimizing enlarged pores, improving skin tone, fading acne marks, and reducing fine lines and wrinkles." |
| Hyaluronic Acid | "For the oh-so-plump look! The gold standard of hydration, Hyaluronic Acid binds water to skin cells and repairs moisture barriers." |
Formulation at a Glance
From the ingredient list published on the product page. Not part of the laboratory report.
Active Ingredients
| Component | Role in the formulation |
|---|---|
| Niacinamide | Vitamin B3 derivative used for tone and barrier support. |
| Tocopheryl Acetate | Stable vitamin E ester; antioxidant. |
| Glyceryl Glucoside | Sugar-derived humectant that supports surface hydration. |
Moisturising and Emollient
| Component | Role in the formulation |
|---|---|
| Isononyl Isononanoate | Light non-greasy emollient ester. |
| Glycerin | Humectant that draws water into the skin surface. |
UV Filters
| Component | Role in the formulation |
|---|---|
| Titanium Dioxide | Mineral UV filter; also used as a white pigment. |
Texture and Stability
| Component | Role in the formulation |
|---|---|
| Aqua | Solvent base of the formulation. |
| Cetearyl Olivate | Olive-derived emulsifier. |
| Sorbitan Olivate | Olive-derived co-emulsifier. |
| Ammonium Acryloyldimethyltaurate/Carboxyethyl Acrylate Crosspolymer | Polymer that creates a light gel texture. |
Preservative System
| Component | Role in the formulation |
|---|---|
| Phenoxyethanol | Broad-spectrum preservative used at low levels. |
Colourants
| Component | Role in the formulation |
|---|---|
| Mica | Mineral that adds light diffusion and shine. |
| Iron Oxide | Mineral pigment providing colour. |
What the Formulation Leaves Out
| Excluded | Basis |
|---|---|
| No sulphates | Not present in the published ingredient list. |
| No parabens | Not present in the published ingredient list. |
| No silicones | Not present in the published ingredient list. |
| No mineral oil | Not present in the published ingredient list. |
Published Research on Key Actives
Published literature on each ingredient, not studies on this product.
| Ingredient | Published finding | Relevance to the formulation |
|---|---|---|
| Niacinamide | Topical niacinamide has been reported to improve the appearance of ageing facial skin, including tone and texture (Bissett DL, et al. Dermatol Surg. 2005;31(7 Pt 2):860-865). | Supports the inclusion of niacinamide in tone and barrier formulas. |
| Hyaluronic Acid | Hyaluronic acid is documented as a key water-binding molecule in skin hydration (Papakonstantinou E, et al. Dermatoendocrinol. 2012;4(3):253-258). | Supports hyaluronic acid or sodium hyaluronate as a hydrating agent. |
| Vitamin E | Vitamin E is reviewed as a major lipid-soluble antioxidant in skin, with photoprotective and moisturising roles (Keen MA, Hassan I. Indian Dermatol Online J. 2016;7(4):311-315). | Supports vitamin E as an antioxidant and emollient stabiliser. |
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of Radiance+ Juicy Dew Drops 30 ml. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report for Radiance+ Juicy Dew Drops 30 ml is available as issued by the laboratory. It carries the laboratory letterhead, the ULR number, and the authorised signatory's details.
The Tested Product
Radiance+ Juicy Dew Drops 30 ml
The results on this page come from laboratory testing of a sample from batch AH0178. See the complete ingredient list, current offers and reviews on the product page. Learn more about Hyaluronic Acid and Niacinamide. You can also explore the full product range or other products in this category.
View ProductFrequently Asked Questions
A: Yes. In this report, Lead, Cadmium, Arsenic and Mercury were reported below the laboratory's stated detection limit of 0.25 mg/kg at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-5369).
A: For the tested batch, microbial counts were reported within the limits of the referenced standard and the specified pathogens were reported Absent. These results indicate the tested sample met the referenced microbiological limits; they do not establish overall product safety.
A: The measured pH in this report is 5.93.
A: The published ingredient list for this product contains no sulphates, parabens, silicones or mineral oil. This is based on the ingredient list, not on the laboratory report, which covers contaminants and microbiological quality.
A: No. The report covers chemical and microbiological parameters on a sample from the stated batch. Performance and cosmetic-benefit claims are made by the brand on the product page and are not part of this laboratory report.
A: "Not Detected" means a substance was below the laboratory's stated detection limit using the specified method. "Absent" means a specified microorganism was not detected in the tested quantity using the referenced method.
A: A ULR (Unique Lab Report) number is a one-of-a-kind identifier that NABL-accredited laboratories print on every test report, making it traceable. The ULR for this report is TC536923000000919F. The original report PDF linked on this page carries the laboratory letterhead and authorised signatory details.
A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-5369) on a sample of this product. It does not represent a product certification by NABL.
A: The report covers batch AH0178 (manufactured 12/2022). The laboratory report states the tested sample as 30 ml x 10. Results refer only to the tested sample and the parameters listed.
References
- IS:2711:1979. Bureau of Indian Standards.
- IS:6608:2004. Bureau of Indian Standards.
- Indian Pharmacopoeia 2018. Indian Pharmacopoeia Commission.
- IS:14648:2011. Bureau of Indian Standards.
- Sigma Test & Research Centre. Test reports 13010094/A, 13010094/B.
